#10 HERON BLUE x 1-1/2 inch Sheet Metal Roofing Screws 250 Count* Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1-1/2" Under Head
* Metal Screws are painted to closely match many brands of metal roofing though color may vary
* Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc)
* Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily
* #10 Sheet Metal roofing screws are galvanized for corrosion resistance
* Galvanized Coating has passed the 1,000 hour salt spray corrosion test without failures
* Self-starting roofing screws help take the headache out of sheet metal roof and siding installation
* Use on any metal roofing or siding project, where 1 inch metal to wood roofing screws are needed
* For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to
* Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing
| Manufacturer | Their Color | Manufacturer | Their Color |
|---|
Everlast | Heron Blue | Ideal Roofing | Heron Blue |
Please keep in mind when choosing the best screw color to match your roofing that differences in computer screens, in sheet metal roofing production and roofing screw production, the color you order and the color of your roofing may vary to some degree
ONLY screw head is painted to ensure EPDM washer seals to metal roof. NO paint on the threads to maximize holding strength. #10 HERON BLUE x 1-1/2 inch Long Sheet Metal Roofing ScrewsAll our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes.Comparedto neoprene washers, the EPDM temperature range of -60 to 350 F is far superior toNeoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)
When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.
Installation Instructions
Available Here - Follow the Link| Thread Diameter | Decimal Diameter | Fraction Diameter |
|---|
#10 | 0.185 | 3/16" | #12 | 0.218" | 7/32" | #14 | 0.25" | 1/4" |
Other HERON BLUE Colored Metal Roofing Screws Options Available - Click On The Links
We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sake.Additional Color Matches by Manufacturer
Available Here - Follow the LinkNeeding a 1/4" Hex Head Drill Bit?
Available Here - Follow the LinkFor Contractor Pricing (View Cart to See Savings)
Order 3 or more #10 X 1.5 Metal to Wood Roofing Screws or other 250 COUNT Quantity - Save 8% Order 10 or more #10 X 1.5 Metal to Wood Roofing Screws or other 250 COUNT Quantity - Save 12% Order 50 or more #10 X 1.5 Metal to Wood Roofing Screws or other 250 COUNT Quantity - Save 25% Order 240 (1/2 Pallet/24 Boxes) of 250 COUNT #10 X 1-1/2 inch Metal to Wood Roofing Screws Quantity - Save 30% Order 480 (Full Pallet/48 Boxes) of 250 COUNT #10 X 1-1/2 inch Metal to Wood Roofing Screws Quantity - Save 35%
