#12 DARK BRONZE x 2-1/2 inch Sheet Metal Roofing Screws 250 Count* ReGrip Screws designed to replace screws or nails that have failed, loose and cannot be tightened
* These screws should be used when replacing smaller nails or screws in roofing or siding projects
* DARK BRONZE coated roof screw head is painted to closely match many brands of metal roofing
* The color on the roof screw heads is painted with a two part polyurethane for longer product life
* Galvanized Coating has passed the 1,000 hour salt spray corrosion test without failures
* Screws have a 1/4 Inch Hex Screw Head and ~5/8" diameter EPDM washer to seal screws to roofing panel
* Self-starting roofing screws help take the headache out of sheet metal roof and siding installation
* Use on any metal roofing or siding project where 2-1/2 inch roofing screws are needed
* For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to
* Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing
Manufacturer | Their Color | Manufacturer | Their Color | Manufacturer | Their Color |
---|
A B Martin | Dark Bronze | Flexospan | #410 Dark Bronze | Lyon Metal Standing Seam | Dark Bronze |
Please keep in mind when choosing the best screw color to match your roofing that differences in computer screens, in sheet metal roofing production and roofing screw production, the color you order and the color of your roofing may vary to some degree
ONLY screw head is painted to ensure EPDM washer seals to metal roof. NO paint on the threads to maximize holding strength. #12 DARK BRONZE x 2-1/2 inch Sheet Metal Roofing Screws 250 CountAll our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes.Comparedto neoprene washers, the EPDM temperature range of -60 to 350 F is far superior toNeoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)
When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.
Thread Diameter | Decimal Diameter | Fraction Diameter |
---|
#10 | 0.185 | 3/16" | #12 | 0.218" | 7/32" | #14 | 0.25" | 1/4" |
Installation Instructions
Available Here - Follow the LinkOther DARK BRONZE Colored Metal Roofing Screws Options Available - Click On The Links
We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sake.Additional Color Matches by Manufacturer
Available Here - Follow the LinkNeeding a 1/4" Hex Head Drill Bit?
Available Here - Follow the LinkFor Contractor Pricing (View Cart to See Savings)
Order 3 or more #12 X 2.5 Metal to Wood Roofing Screws or other 250 COUNT Quantity - Save 8% Order 10 or more #12 X 2.5 Metal to Wood Roofing Screws or other 250 COUNT Quantity - Save 12%