#9 (10"-19") Black Round EPDM Flexible Pipe Flashing Dektite: Metal Roof Jack Pipe Boot-Metal Roof Flashing (DF109B)* Flashing Base Diameter is 25-1/2" - Fits 10" to 19" Outside Pipe Diameter
* Rated for Continuous Service Temperature Ranges of -58F to 239F
* Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
* EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing
* Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2"
* If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
* Reduces Building Maintenance Due To The Long Life of the Dektite Product
* Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents
* 20 Year Manufacturer's Warranty Against Manufacturing Defects
Works with Metal Roof Pitches up to 10/12 (0 to 40 degrees)
On a Roof with a 10/12 to 12/12 Pitch (40 Degrees) Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top. When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe
Manufacturers Recommended Temperature Ranges Are Clearly Stated Please Verify This Product Will Meet Specifications Of Your Installation Or Possible Product Damage May OccurInstallation Instructions
Available HereDektite Installation Screws Up To Size #8 Round or Square
Available Here| Product Number | Fits Pipe Outside Diameter | Base Size Diameter | Temperature Range | Flashing Material |
|---|
| DF100B | 0" to 1-3/8" | 3-3/4" | -58F to 239F | EPDM |
| DF101B | 1/4" to 2-1/2" | 4-3/4" | -58F to 239F | EPDM |
| DF102B | 1-3/4" to 3-1/4" | 6-1/2" | -58F to 239F | EPDM |
| DF103B | 1/4" to 5" | 8" | -58F to 239F | EPDM |
| DF104B | 3" to 6-1/4" | 9-1/2" | -58F to 239F | EPDM |
| DF105B | 4-1/4" to 7-1/2" | 11" | -58F to 239F | EPDM |
| DF106B | 5" to 9" | 12-3/4" | -58F to 239F | EPDM |
| DF107B | 6" to 11" | 14-3/4" | -58F to 239F | EPDM |
| DF108B | 7" to 13" | 16-3/4" | -58F to 239F | EPDM |
| DF109B | 10 to 19" | 25-1/2" | -58F to 239F | EPDM |
