#802 Gray Dektite Retrofit EPDM Flexible Pipe Flashing (RF802G)* Continuous Service Temperature Ranges of -58F to 239 F (EPDM)
* Flashing Base Diameter is 10-3/4" - Pipe Boot Fits 2" to 7-1/2" Outside Pipe Diameter
* Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
* EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing Easily
* Fasten Aluminum Collar To Metal Roof With Metal Roofing Screws Every 1-1/2"
* Where the Height of Pipe is Difficult to Reach or Existing Obstruction Blocks Top of Pipe;
* Flashing Can Be Cut Along the Seam and Resealed With Provided Clips
* If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
* Reduces Building Maintenance Due To The Long Life of the Dektite Product
* Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents
* 20 Year Manufacturer's Warranty Against Manufacturing Defects
Works with Metal Roof Pitches up to 10/12 (0 to 40 degrees) .
On a Roof with a 10/12 to 12/12 Pitch (40 Degrees) Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top. When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe
Caution: This product is not rated for temperatures experienced by prolonged contact with a single wall chimney. Manufacturers Recommended Temperature Ranges Are Clearly Stated. Please Verify This Product Will Meet Specifications Of Your Installation Or Possible Product Damage May Occur
For single wall chimney applications consider using a High Temperature Silicone Flashing product that is rated for high temperature applications
Installation Instructions
Available Here - Follow the LinkDektite Installation Screws Up To Size #8 Round or Square
Available Here - Follow the Link| Product Number | Fits Outside Diameter Pipe | Base Size Diameter | Temperature Range | Flashing Material |
|---|
| RF801G | 3/4" to 2-3/4" | 6-1/3" | -58F to 239F | EPDM |
| RF802G | 2" to 7-1/2" | 10-3/4" | -58F to 239F | EPDM |
| RF803G | 3-1/4" to 10" | 14-1/2" | -58F to 239F | EPDM |
| RF801B - Black | 3/4" to 2-3/4" | 6-1/3" | -58F to 239F | EPDM |
| RF802B - Black | 2" to 7-1/2" | 10-3/4" | -58F to 239F | EPDM |
| RF803B - Black | 3-1/4" to 10" | 14-1/2" | -58F to 239F | EPDM |
| RF901RE - Red | 3/4" to 2-3/4" | 6-1/3" | -58F to 392F | Silicone |
| RF902RE- Red | 2" to 7-1/2" | 10-3/4" | -58F to 392F | Silicone |
| RF903RE- Red | 3-1/4" to 10" | 14-1/2 | -58F to 392F | Silicone |
For Contractor Pricing (View Cart to See Savings)
Order 2 or more RETROFIT Pipe Flashing or other EACH Quantity - Save 10% Order 10 or more RETROFIT Pipe Flashing or other EACH Quantity - Save 25%
