Chain Link Rolling Gate Hardware KIT* Complete kit for mounting Rolling/Sliding Gate using 1-5/8" Pipe and (1-5/8"-2-7/8") Track Pipe Post
* Products are easy to install and come with U-bolts and nuts needed to install most items
* All products are of heavy duty galvanized steel manufacturing to prevent rust and corrosion
* The Track Wheels are a Solid One Piece design and are about 5-1/4" Heavy Duty Cast style
* Includes 6" wheel carrier and ROLO gate latch in addition to two 2" x 1-5/8" track wheels
For 1-5/8" Track Pipe (1-5/8"-2-7/8"). Track Bracket for a rolling or a sliding chain link fence gate. This one mounts a 1-5/8" pipe track to a chain link fence post sizes from 1-5/8 inch to 2-7/8 inch. The typical rolling gate track system will require 6 of these track brackets. Brackets are galvanized chain link fence hardware. Use with Track Wheels that mount to 1-5/8" track.
Track Wheel Rolling/Sliding Gate Rear Track Roller for 2" (1-7/8") Gate Frame and 1-5/8" Track Pipe. The Track Wheels are a Solid One Piece design and are about 5-1/4" Heavy Duty Cast style, These are the safety track wheel type with a curved retainer to keep gate on track. Use CQ20 1-5/8" outside diameter pipe (we recommend DQ40) for the roller to roll on. We do not recommend using tubing in place of track pipe.Rollers are commercial and industrial strength, come with a manufacturers limited lifetime warranty
This chain link fence gate Wheel Carrier (gate helper wheel set) is an essential part of your rolling chain link fence gate. This wheel carrier operates a horizontal rolling gate or "sliding gate". It works in conjunction with the typical chain link track roller gate system. It is galvanized to last a long time. Rolling Gate Hard Rubber wheels are 6" in diameter. And a total width of 10" wheel axle length. Includes U-bolts to Accommodate Rolling Gate-Sliding Gate Frames Sizes 1-5/8" thru 1-7/8". Galvanized Steel Bracket/Body on Gate Wheel Parts Insures Long Rolling Gate Wheel Bracket Life. Easy to Install Chain Link Fence Rolling/Sliding Gate hardware. Gate Wheel for New or Existing Gates
For 1-5/8" to 1-7/8" (2") chain link gate frame. This latch is great for use with rolling chain link gates, sliding gates, and cantilevered rolling gates. The ROLO can be padlocked for security. Requires two brace bands to attach to the "Latch Post" - purchase brace bands based on the size of your post
Cost of kit is less expensive than purchasing individual items separately. Frame and pipe measurements are "outside diameters" - pre-measure ensure you receive correct item
Need Brace Bands to Install ROLO Latch?
Available Here - Follow the Link
