#3 (DF103G) Gray Dektite Standard EPDM Flexible Metal Roofing Pipe Flashing* Continuous Service Temperature Ranges of -58F to 239F (EPDM)
* Flashing Base Diameter is 8", Pipe Boot Fits 1/4" to 5" Outside Pipe Diameter
* Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
* EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing with Ease
* Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2"
* If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
* Reduces Building Maintenance Due To The Long Life of the Dektite Product
* Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents
* 20 Year Manufacturer's Warranty Against Manufacturing Defects
On a Roof with a 10/12 to 12/12 Pitch Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top.
When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe
CAUTION This product is not rated for temperatures experienced by prolonged contact with a single wall chimney. Manufacturers Recommended Temperature Ranges Are Clearly Stated Please Verify This Product Will Meet Specifications Of Your Installation Or Product Damage May OccurFor single wall chimney applications consider using a High Temperature Silicone Flashing product that is rated for high temperature applications.
Installation Instructions
Available Here - Follow the LinkDektite Installation Screws Up To Size #8 Round or Square
Available Here - Follow the Link| Product Number | Fits Pipe Outside Diameter | Base Size Diameter | Temperature Range | Flashing Material |
|---|
DF100G | 0" to 1-3/8" | 3-3/4" | -58F to 239F | EPDM | DF101G | 1/4" to 2-1/2" | 4-3/4" | -58F to 239F | EPDM | DF102G | 1-3/4" to 3-1/4" | 6-1/2" | -58F to 239F | EPDM | DF103G | 1/4" to 5" | 8" | -58F to 239F | EPDM | DF104G | 3" to 6-1/4" | 9-1/2" | -58F to 239F | EPDM | DF105G | 4-1/4" to 7-1/2" | 11" | -58F to 239F | EPDM | DF106G | 5" to 9" | 12-3/4" | -58F to 239F | EPDM | DF107G | 6" to 11" | 14-3/4" | -58F to 239F | EPDM | DF108G | 7" to 13" | 16-3/4" | -58F to 239F | EPDM | DF109G | 10" to 19" | 25-1/2" | -58F to 239F | EPDM |
For Contractor Pricing (View Cart to See Savings)
Order 2 or more GRAY Round Pipe Flashing or other EACH Quantity - Save 10% Order 10 or more GRAY Round Pipe Flashing or other EACH Quantity - Save 25%
