#14 GALVANIZED/ZINC 7/8 Inch Long Metal to Metal Type #1 STITCH TEK Roofing Screws* Self drilling Type #1 Metal to Metal Stitching Screws have a 5/16" hex head with a 9/16" EPDM washer
* The #14 x 7/8" Screw is used to attach metal panels together along with several other uses
* These screws have a self drilling tip,means no unnecessary pre drilling needed to install
* The 9/16" EPDM washer is designed to seal the screw to the metal panel to prevent leaking
* The 5/16" hex head provides a solid grip on the screw for positive installation
* Mechanical galvanized screws prevent corrosion and rusting
* Screws have been salt spray tested over 1,000 hours without product failure
* Also Used for attaching corner and rake trims and the ridge cap where they overlap wall steel
Depending on the application and personal preference, No Paint/Galvanized Zinc screws go well with many types of gray, galvanized and other colors of roofing sheet metal. Generally buying galvanized coated screws is a great way to purchase a long lasting but low cost roofing screw
When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.
#14 GALVANIZED/ZINC 7/8 Inch Long Metal to Metal Type #1 STITCH TEK Roofing ScrewsAll our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)
Installation Instructions
Available Here - Follow the Link| Thread Diameter | Decimal Diameter | Fraction Diameter |
|---|
#10 | 0.185 | 3/16" | #12 | 0.218" | 7/32" | #14 | 0.25" | 1/4" |
Other GALVANIZED/ZINC Colored Metal Roofing Screws Options Available - Click On The Links
"
"
We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sakeAdditional Color Matches by Manufacturer
Available Here - Follow the LinkNeeding a 5/16" Hex Head Drill Bit?
Available Here - Follow the LinkFor Contractor Pricing (View Cart to See Savings)
Order 3 or more 14 X 7-8 Stitch Tek Metal to Metal Type 1 or other 250 COUNT Quantity - Save 8% Order 10 or more 14 X 7-8 Stitch Tek Metal to Metal Type 1 or other 250 COUNT Quantity - Save 12%
