#14 COLONIAL RED 7/8 Inch Long Metal to Metal Type #1 STITCH TEK Roofing ScrewsThis Screw is a Special Order Product - All Purchases are Final - No Cancellations Once Order is Placed - No Refunds
Call For Current Shipping Times. (406)752-5253 Ext. 1
* Self drilling Type #1 Metal to Metal Stitching Screws have a 5/16" hex head with a 9/16" EPDM washer
* The #14 x 7/8" Screw is used to attach metal panels together along with several other uses
* Color on the roof screw heads is painted with a two part polyurethane for longer product life
* These screws have a self drilling tip,means no unnecessary pre drilling needed to install
* The 9/16" EPDM washer is designed to seal the screw to the metal panel to prevent leaking
* The 5/16" hex head provides a solid grip on the screw for positive installation
* Mechanical galvanized screws prevent corrosion and rusting
* Screws have been salt spray tested over 1,000 hours without product failure
* Also Used for attaching corner and rake trims and the ridge cap where they overlap wall steel
| Manufacturer | Their Color | Manufacturer | Their Color | Manufacturer | Their Color |
|---|
A B Martin | Colonial Red | Cons Metal Prod | Colonial Red | Flexospan | #330 Colonial Red | Lyon Metal Standing Seam | Colonial Red | McElroy Metal | Colonial Red | Menards | Colonial Red |
Please keep in mind when choosing the best screw color to match your roofing that differences in computer screens, in sheet metal roofing production and roofing screw production, the color you order and the color of your roofing may vary to some degree
ONLY screw head is painted to ensure EPDM washer seals to metal roof. NO paint on the threads to maximize holding strength.When Installing these screws we recommend using screw-gun with torque control or a depth sensing feature. Impact tools are not recommended.
#14 COLONIAL RED 7/8 Inch Long Metal to Metal Type #1 STITCH TEK Roofing ScrewsAll our metal roofing screws use EPDM washers to seal the screw to metal roofing panel to prevent leaking. The EPDM washer is bonded to a galvanized steel washer to prevent sealing issues and to place even pressure on the EPDM washer. Our metal roofing screw EPDM washers hold up well to ozone, ultraviolet radiation, harsh outdoor environmental conditions and temperature extremes. Compared to neoprene washers, the EPDM temperature range of -60 to 350 F is far superior to Neoprene washers which have a much narrower temperature range. (EPDM - synthetic rubber)
Installation Instructions
Available Here - Follow the Link| Thread Diameter | Decimal Diameter | Fraction Diameter |
|---|
#10 | 0.185 | 3/16" | #12 | 0.218" | 7/32" | #14 | 0.25" | 1/4" |
Other COLONIAL RED Colored Metal Roofing Screws Options Available - Click On The Links
We have no affiliation with the manufacturers found on this page, all rights and privileges of the above manufacturers are the property of that manufacturer. Jake Sales branded screws are not authorized by or endorsed by the above metal manufacturers. The above information is provided solely for comparison sakeAdditional Color Matches by Manufacturer
Available Here - Follow the LinkNeeding a 5/16" Hex Head Drill Bit?
Available Here - Follow the LinkFor Contractor Pricing (View Cart to See Savings)
Order 3 or more 14 X 7-8 Stitch Tek Metal to Metal Type 1 or other 250 COUNT Quantity - Save 8% Order 10 or more 14 X 7-8 Stitch Tek Metal to Metal Type 1 or other 250 COUNT Quantity - Save 12%
