#10 x 1-5/8" Reamer Tek Torx/Star Head Self-Drilling Wood to Metal Screws -for Flatbeds, Trailers or Fastening Wood to Steel -T-25 Torx Screw Head (5 POUNDS 565 Approx. Screw Count)

#10 x 1-5/8" Reamer Tek Torx/Star Head Self-Drilling Wood to Metal Screws

* #10 x 1-5/8" Capacity -Usable thread 7/8" (wood) 1/8" metal - 1-1/16" Total Thread Length under head
* Dimensions: Width.38" - Length (total) 1.62" - Shank Size .19" - Uses T-25 Torx/Star Bit
* Reference Installation Instructions Before Installing - Not For Welded Seams or Tempered Metal
* Reamer Tek Screws are for Applications where Wood is Being Fastened to Mild Steel or Aluminum
* Self-Drilling Wings Bore Through Wood and Then Break Off Once They Contact the Metal
* High Quality Treated Steel, Deep, Wide and Sharp Threads Provide Maximum Holding Power
* Corrosion Resistant, Screws Have Passed 1200 Hours of Salt Spray Testing without Coating Failures
* Countersinking Head Provides a Neat and Clean Finished Look, Holds Material in Place Securely
* Torx/Star Drive Delivers Twice the Torque of Phillips or Square Drive Screws With Less Slippage
* Deep Torx/Star Drive Head on These Tek Screws Reduce "Cam-out" When Installing Screws
* Great Tek Screw for Trailer Decks, Truck Beds, Docks, Horse and Utility Trailers and ATV Trailers

Reamer Tek Wood To Metal Screw Capabilities
Typical #10 x 1-5/8" Tek Screw Capacity -7/8" wood to 1/8" metal (1-1/16" Total Thread Length) The #10 x 1-5/8" Reamer Tek Wood to Metal Wood Screws use a T25 (Not Included) Torx/Star Bit. The Torx/Star Head Diameter Measures .38". Use Standard Impact Driver to install. Install screws at Medium speed, Faster speed may damage drill tip. Pre-Drilling During Installation is Normally Not Necessary, However You May need to Pre-Drill if using Tempered Steel or Installing into a Welded Seam.Compare These Quality Reamer Tek Screws to a Type "F" Floorboard Screw,The Type "F" Floorboard Screws are Not Usually Protected Against Corrosion. Compare to the Protection Provided by the Triple Ceramic Coating on These Reamer Tek Screws. This Listing is for 5 Pounds (~565 Screws) of Reamer Tek Wood to Metal Screws with Reamer Wings

Installation Instructions Available Here - Follow the Link

Needing a T25 Torx/Star Drive Bit? Available Here - Follow the Link

Screw Size	Max. Wood Thickness	Max Metal Depth	Overall Thread Length	Torx/Bit Size
10 x 1-5/8" - 1 Pound	7/8"	1/8"	1-1/16"	T25
10 x 1-5/8" - 5 Pounds	7/8"	1/8"	1-1/16"	T25
10 x 1-5/8" - Full Box	7/8"	1/8"	1-1/16"	T25
12 x 2" - 1 Pound	15/16"	3/16"	1-1/8"	T30
12 x 2" - 5 Pounds	15/16"	3/16"	1-1/8"	T30
12 x 2" - Full Box	15/16"	3/16"	1-1/8"	T30
12 x 2-1/2" - 1 Pound	1-5/16"	3/16"	1-9/16"	T30
12 x 2-1/2" - 5 Pounds	1-5/16"	3/16"	1-9/16"	T30
12 x 2-1/2" - Full Box	1-5/16"	3/16"	1-9/16"	T30
14 x 2-3/4 - 1 Pound	1-9/16"	1/4"	1-7/8"	T30
14 x 2-3/4" - 5 Pounds	1-9/16"	1/4"	1-7/8"	T30
14 x 2-3/4" - Full Box	1-9/16"	1/4"	1-7/8"	T30
14 x 3-1/4" - 1 Pound	2-1/16"	1/4"	2-3/8"	T30
14 x 3-1/4" - 5 Pounds	2-1/16"	1/4"	2-3/8"	T30
14 x 3-1/4" - Full Box	2-1/16"	1/4"	2-3/8"	T30
14 x 4" - 1 Pound	3"	1/4"	3-1/4"	T30
14 x 4" - 5 Pounds	3"	1/4"	3-1/4"	T30
14 x 4" - Full Box	3"	1/4"	3-1/4"	T30

For Contractor Pricing (View Cart to See Savings)
Order 2 or more #10 Bronze Star Reamer Tek Wood to Metal Screws or other 5 POUNDS Quantity - Save 10%
Order 6 or more #10 Bronze Star Reamer Tek Wood to Metal Screws or other 5 POUNDS Quantity - Save 20%