#1 (1/4" to 2-1/2") DEKTITE SQUARE BASE COMBO PIPE FLASHING BOOT: GRAY EPDM Square Base Flexible Pipe Flashing Dektite (DC101GC)The Dektite Product is a Non-Stock Item - No Returns Will Be Accepted Once Item Ships* Rated for Temperatures with Continuous Service Temperature Ranges of -58F to 239F
* Pipe boot fits pipes from 1/4" to 2-1/2", with a base size of 5-1/2" x 5-1/2"
* This Dektite Product is Unique in Design, Can be Installed Like a Standard Pipe Flashing
* Or Where the Height of Pipe is Difficult to Reach or Existing Obstruction Blocks Top of Pipe;
* Flashing Can Be Cut Along the Seam and Resealed With Provided Clips
* Easily Customized on Site using Heavy Scissors or Shears.
* EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing Easily
* Fasten Aluminum Collar To Metal Roof With Metal Roofing Screws Every 1-1/2"
* If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
* Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents
* Product Comes With a 20 Year Manufacturer's Warranty Against Manufacturing Defects
Works with Metal Roof Pitches up to 12/12 (0 to 45 degrees)
On a Roof with a 10/12 to 12/12 Pitch (45 Degrees) Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top.When Used With Deep Ribbed Profile Roofing Panels With 1-1/2" Deep Corrugation Or More, Consider Using Next Size Up That Will Accommodate The Same Diameter Pipe
Manufacturers recommended temperature ranges are clearly stated Please verify this product will meet specifications of your installation or possible product damage may occur| Product Number | Fits Pipe Outside Diameter | Base Size | Temperature Range | Flashing Material |
|---|
| DC101GC | 1/4" to 2-1/2" | 5-1/2" X 5-1/2" | -58F to 239F | EPDM |
| DC102GC | 1/4" to 3-1/4" | 7" x 7" | -58F to 239F | EPDM |
| DC103GC | 1/4" to 5" | 8-3/4" x 8-3/4" | -58F to 239F | EPDM |
| DC104GC | 3" to 7" | 11-1/4" to 11-1/4 | -58F to 239F | EPDM |
| DC105GC | 4-1/4" to 7-1/2" | 14-1/4" X 14-1/4" | -58F to 239F | EPDM |
| DC106GC | 5" to 9" | 14-1/4" x 14-1/4" | -58F to 239F | EPDM |
| DC107GC | 6" to 11" | 17-3/4" X 17-3/4" | -58F to 239F | EPDM |
| DC108GC | 7" to 13" | 17-3/4" X 17-3/4" | -58F to 239F | EPDM |
| DC109GC | 9-1/2" to 20" | 27" x 27" | -58F to 239F | EPDM |
For Contractor Pricing (View Cart to See Savings)
Order 2 or more DC101GC #1 Dektite Gray Square Base Combo Pipe FlashingQuantity - Save 10% Order 10 or more DC101GC #1 Dektite Gray Square Base Combo Pipe FlashingQuantity - Save 25%
